P0C96 BMW Fault Code

Description:

Vehicle Speed Sensor (VSS) Intermittent Indicates the powertrain control module (PCM) detected an error in the vehicle speed information. Vehicle speed data is received from either the vehicle speed sensor (VSS), transfer case speed sensor (TCSS), anti-lock brake system (ABS) control module, generic electronic module (GEM), or central timer module (CTM). This DTC is set the same way as P0C96. However, it is intended to flash the transmission control indicator lamp (TCIL) for first time VSS circuit error/malfunctions. Refer to possible causes for P0C96

P0C96 Code Symptoms :

When you turn on the ignition, the Service Engine Soon or Check Engine P0C96 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the P0C96!

Diagnosis And Repairing P0C96

P0C96 OBD 2 code on vehicles with electronically controlled automatic transmissions, the 3-4 shift solenoid is responsible for actuating the hydraulic circuits to activate clutches or bands that change gears inside the automatic transmission.

How to fix P0C96 code ?

• Clogged or faulty fuel injector (s)
• Continuous oil flow to the VCT piston chamber
• Variable Camshaft Timing (VCT) position circuit poor electrical connection

Some systems require that the actuator has an adequate supply of brake fluid. Low brake fluid levels can mimic the symptoms of code P0C96, so consult the manual to locate the brake fluid reservoir.

Bear in mind that a low fluid level can set code P0C96 on some applications, so make sure that on fluid operated systems the fluid level is up to the mark before starting an electrical diagnosis.